39
Keys, doors, windows, sunroof
Light emitting diode (LED)
During the first 10 seconds of anti-theft
alarm system activation:
After the first 10 seconds of anti-theft
alarm system activation:
If a system error occurs, please contact
a workshop.
To deactivate
Press button
q
on remote control
– or –
switch on ignition.
In the event of a fault in the remote control,
open the vehicle as described on page 36.
If the alarm is triggered when the driver’s
door is opened, deactivate the anti-theft
alarm system by switching on the ignition.
Alarm
While the anti-theft alarm system is
switched on the alarm can be triggered,
indicated by:
z
an acoustic signal (horn) and
z
a visual signal (hazard warning lights).
The number and duration of the alarms are
legally established.
The alarm can be silenced by pressing a
button on the remote control or by
switching on the ignition. The anti-theft
alarm system is deactivated at the same
time.
Alarm siren with integrated battery
3
The alarm siren monitors the on-board
voltage network and triggers an alarm if
this network is manipulated (e.g. if the
vehicle’s battery is disconnected by
unauthorised persons). The alarm siren has
its own power supply and is therefore not
dependent on the vehicle’s battery.
If the vehicle’s battery is to be
disconnected (e.g. for maintenance work),
the alarm siren must be deactivated as
follows: switch the ignition on then off,
disconnect the vehicle’s battery within
15 seconds.
To switch off alarm siren:
Switch ignition on then off.
z
LED
illuminates
= Test,
delayed switch-on
z
LED flashes
rapidly
= Door, luggage
compartment or
bonnet open,
system error
z
LED flashes
slowly
= System switched on
Ofrecido por www.electromanuales.com