Vauxhall Antara Скачать руководство пользователя страница 25

Страница: 25 / 137

CD Player

■ Dirt and liquids on CDs can smear

the lens of the audio player inside

the device and cause faults.

■ Protect CDs from heat and direct

sunlight.

■ The following restrictions apply for

the data stored on an MP3/WMA

CD:
Maximum folder/playlist number:

200.
Maximum file/song number: 800.
At least 8 folders in depth hierarchy

are supported.
WMA files with Digital Rights

Management (DRM) from online

music shops cannot be played.
WMA files can only be played back

safely if they were created with

Windows Media Player version 9 or

later.
Applicable playlist

extensions: .m3u, .pls, .wpl.

Playlist entries must be in the form

of relative paths.

■ This chapter deals only with playing

MP3 files since the operation for

MP3 and WMA files is identical.

When a CD with WMA files is

loaded MP3 related menus are

displayed.

Usage

Notice

Within the CD player menus you can

only use the touch screen to select/

activate the screen buttons at the

bottom of the menus.

Starting CD replay

Push an audio or MP3 CD with the

labelled side upward into the CD slot

until it is pulled in.
CD replay starts automatically and

the CD or CD MP3 menu is displayed.
If the inserted CD was already played

before in the CD player, CD replay

starts with the track last played.

If there is already a CD in the unit, but

the required CD menu is not active:
Press the MEDIA button once or

several times to open the audio CD or

CD MP3 menu and start CD replay.
CD replay starts with the track that

was last played.
Depending on the data stored on the

audio CD or MP3 CD differing

information about the CD and the

current music track will be shown on

the display.

Содержание Antara










































































































































Результаты поиска

Содержание Antara

Отзывы:

Бренды по названию

Популярные бренды

Vauxhall Antara, Инструкция по информационно-развлекательной системе

Результаты поиска

Содержание Antara

Отзывы:

Бренды по названию

Популярные бренды