Vauxhall Antara, Инструкция по информационно-развлекательной системе

Страница: 104 / 137

Radio 103
Autostore lists
Activate/deactivate AS level
Tap the AS button.
When the AS level is active, the
display shows AS.
The AS level can also be activated
and deactivated using the FM/AM
button
3
101.
Autostore (AS)
Automatic storing (AS) of any
receivable station is possible in all
wavebands. These stations are
stored in a separate AS memory.
To automatically store stations,
proceed as follows:
1. Select the required waveband.
2. Enable/disable on standby for
traffic announcements if desired
3
103.
3. Hold down the AS button until you
hear the confirmation signal.
The radio changes over to the AS
level of the selected waveband (FM-
AS or AM-AS).
The automatic station storing is
started.
The 9 best receivable stations in the
selected waveband are stored to
memory slots 1 to 9.
After the stations have been stored,
the desired station can be selected by
pressing the appropriate station
button.
RDS is switched on automatically
when automatic storing is enabled.
First, all receivable RDS stations are
stored.
If on standby for traffic announcement
is switched on prior to or during
automatic storing, the radio will select
a memory slot with a traffic
announcement station on completion
of the automatic station search.
If on standby for traffic announcement
is switched on during automatic
storing, then the automatic station
search will remain active until at least
one traffic programme is found.
Storing new stations with AS
If you drive out of the reception area
of a stored station, new stations need
to be stored.
Calling up a station
The desired waveband and the
desired mode need to be active
3
101.
Hold down the AS button to go to the
AS level.
Select the storage location with the
storage buttons.
Radio data system (RDS)
RDS is a service provided by the radio
stations which makes it significantly
easier to find the FM channels
required and enables them to be
received without interference.
RDS is only possible on the FM band.
Switching RDS on/off
If RDS is switched on, the RDS
functions are enabled and only RDS
stations are sought during the
automatic station search.