Vauxhall Antara, Инструкция по информационно-развлекательной системе

Страница: 100 / 137

Introduction 99
3. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
4. Press the SOUND button until the
last active display appears again.
Sound settings in the Settings
menu
Alternatively, the settings for Fader,
Balance and Sound can be changed
in the Settings menu:
1. Press the SETTINGS button.
2. Press OK until the relevant
function is displayed.
3. Adjust the value or select a tone
colour (see above) with
m
or
n
.
After a few seconds the most
recent display reappears.
4. Press the SETTINGS button
again and move back one level in
the Settings menu.
5. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
Volume settings
Press SETTINGS button.
The following menu items are
available:
■ AUX Vol. AUX input volume, e.g. a
portable CD player
■ TA Volume: Volume of traffic
announcements
■ SDVC: Speed Dependent Volume
Control
■ On Volume: Maximum volume
when the Infotainment system is
switched on
■ Ext. In Vol.: Volume of an external
source (for example when
connecting a mobile telephone)
AUX Vol.
Use this function to adjust the AUX
input level in relation to other audio
sources (e.g. radio). This function is
only available when the AUX audio
source is enabled.
1. Set the external audio source to
maximum volume.
2. Press the SETTINGS button.
3. Press OK to select the relevant
function.
4. Adjust the value with
m
or
n
.
After a few seconds the most
recent display reappears.
5. Press the SETTINGS button
again and move back one level in
the Settings menu.
6. Once you have changed settings,
press one of the function buttons
FM/AM, CD/MP3 or BC to display
the relevant function.
TA Volume
If the TP function is switched on, the
system increases the volume for
traffic announcements by default.
This function allows setting a
minimum volume for traffic
announcements.
1. Press the SETTINGS button.
2. Press OK to select the relevant
function.
3. Adjust the value with
m
or
n
.
After a few seconds the most
recent display reappears.