10-8
Vehicle care
High beam and dipped beam
1.Remove headlamp protective
cover.
2.Detach plug connector from bulb.
3.Push retaining spring wire clip
forward and unhook it.
4.Remove bulb from reflector
housing and pull bulb straight out of
socket.
5.Insert new bulb by pushing in and
install in reflector housing.
6.Engage spring wire clip, and
reattach plug connector to bulb.
7. Replace headlamp protective
cover.
Parking lamps
1. Remove headlamp protective
cover.
2. Remove parking lamp socket from
reflector housing.
3. Remove bulb (2) from socket by
pulling straight out.
4. Insert new bulb by pushing in.
5. Install parking lamp socket in
reflector housing.
6. Replace headlamp protective
cover.
Front turn signal lamps
1. Rotate bulb holder anti-clockwise
and remove from reflector housing.
2. Push bulb (1) into socket slightly,
rotate anti-clockwise and remove.
3. Insert new bulb and install bulb
holder in reflector housing by
rotating clockwise.
Front fog lamps
3
Access the rear of the fog lamp from
behind the front bumper.
1. Rotate bulb holder anti-clockwise
and remove from reflector housing.
Содержание 2009 Agila
Страница 1: ...0 1 VAUXHALL Agila VAUXHALL Agila Owner s Manual Model Year 2009 0 Edition July 2008 TS 1669 A 09 ...
Страница 6: ...0 4 Introduction ...
Страница 11: ...1 5 In brief ...
Страница 156: ...13 8 Index ...