Vauxhall 2009 Agila, Руководство пользователя

Страница: 128 / 156

10-27 Vehicle care
„ Manual transmission in neutral,
automatic transmission
3
in P .
Connect the leads in the order shown
in the illustration:
1. Connect one end of the first jump
lead to the positive terminal 1 of the
battery providing the jump start
(identified by “+” sign on battery
case or terminal).
2. Connect the other end of the first
jump lead to the positive terminal 2
of the discharged battery (“+” sign).
3. Connect one end of the second
jump lead to the negative terminal 3
of the battery providing the jump
start (identified by "-" sign on
battery case or terminal).
4. Connect the other end of the
second jump lead 4 to ground on
the vehicle with the discharged
battery, e.g. on the engine block.
„ Do not connect leads to negative
terminal of discharged battery.
„
The last connection point should be
as far away from the discharged
battery as possible.
„ Route leads so they cannot catch
on rotating parts in engine
compartment.
„ Start the engine of the vehicle
providing the jump start.
„ After 5 minutes, start the other
engine. Start attempts should be
made at intervals of 1 minute and
should not last longer than
15 seconds.
„
After starting, allow both engines to
idle for approx. 3 minutes with
leads connected.
„ In order to avoid excess voltage in
the electrical system, before
removing a lead, switch on an
electrical consumer (e.g. lamps,
heated rear window) in the vehicle
receiving the jump start.
„ Operate discharged vehicle for
approx. 20 minutes to allow for
recharging.
„ Reverse above sequence exactly
when removing leads.
9
Warning
Care must be taken to ensure that
the leads do not inadvertently
contact metal surfaces within the
compartment area.