Vauxhall 2009 Agila, Руководство пользователя

Страница: 77 / 156

7-6 Infotainment system
Radio
Radio reception
3
Vehicle radio reception will differ from
that obtained with domestic radios.
As the vehicle antenna is relatively
near the ground, the broadcasting
companies cannot guarantee the
same quality of reception as is
obtained with a domestic radio using
an overhead antenna.
„ Changes in distance from the
transmitter
„ multi-path reception due to
reflection and
„
shadowing
may cause hissing, noise, distortion
or loss of reception altogether.
AM-FM radio
The Infotainment system provides the
following wavebands:
AM (Long Wave and Medium Wave)
and FM (Frequency Modulation).
In addition, a manual storing and
automatic storing facility is available
on each of the wavebands, where
stations can be manually or
automatically stored and recalled
using the preset stations buttons 1-6.
Radio mode
To enter radio mode when the
Infotainment system is switched-off
or while in any other mode, press the
FM/AM button h . The last station
selected is received.
Wavebands appear in the following
order when the FM/AM button
h
is
pressed repeatedly:
„ FM1,
„
FM2,
„ LW,
„ MW1,
„ MW2.
Automatic search
To search for the next or previous
radio station, press and hold the
h button
j
(higher frequency) or
g button
i
(lower frequency) for
approx. 1 second and release.
The Infotainment system will tune to
the next receivable radio station on
the selected waveband.
If ‘AF’ has been switched on
previously, the unit only searches for
RDS stations.
Station memory
In each waveband, 6 stations can be
stored under preset station memory
locations 1-6.
To store stations manually
Tune to the desired waveband and
station. Press and hold the preset
station button (1-6) for approx.
2 seconds where the selected station
is to be stored. Previously stored
stations are overwritten.
To store stations automatically
Tune to the desired waveband. Press
and hold the AST button 4 for
approx. 2 seconds. 6 stations with
strong signals are automatically
stored under preset station memory
locations 1-6. Previously stored
stations are overwritten.
If ‘AF’ has been switched on
previously, the unit only searches for
RDS stations.