16
the decreasing cuff pressure during deflation.
3.
When the device detects the pulse, the heart
symbol begins to blink on the display and a
beep tone will register with every pulse beat.
4.
When measurement is complete, a long beep
tone will register. The measured systolic and
diastolic blood pressure values as well as the
pulse rate are displayed. Traffic light indicator
bars and colored backlight will be displayed
according to the classification ranges in which
the measurement results lie.
5.
If the symbol
appears on the display, it
indicates that an irregular heartbeat has been
detected during measurement. This may cause
results to vary from your normal blood
pressure levels. It is recommended that you
retake your measurement after a brief pause
of at least 1 minute. It is important that you remain relaxed, still and not
talk during measurement.
Note: If the symbol appears more frequently than usual, it is recommended
that you consult with your healthcare provider.
6.
The measurement results will remain on the display until the device is
switched off by pressing the Start/Stop button
. If the button is not
pressed within 1 minute, the device will switch off automatically to save
power.
7.
If the device is set to SmartCheck™ measurement mode, it will take 3
separate measurements in succession and calculate the analyzed blood
Содержание vB100A
Страница 11: ...7 ...
