Vaunn Medical vB100A, Руководство пользователя

Страница: 21 / 28

17
pressure values. There will be 15 seconds resting time between
measurements. During this resting period, the symbol will blink on the
display and time will count down. You will hear a beeping sound during the
last 5 seconds.
Note:

If measured data from each cycle differs too much, a 4
th
measurement will be performed before final results are displayed.

In rare cases where the blood pressure values are unstable even
after the fourth measurement, <<Err6>> will be displayed.
5.6 Discontinuing a measurement
If it is necessary to interrupt and/or stop a blood pressure measurement for any
reason (e.g. the user feels unwell), the Start/Stop button can be pressed at
any time. The device will immediately decrease the cuff pressure.
5.7 Switching device off
To switch device off, press the Start/Stop button . If no activity is detected
within 1 minute, the device will switch off automatically.
5.8 Memory recall of recorded data
The blood pressure monitor automatically records and stores up to 99
measurement results for each user. To recall recorded data, press the Memory
button to display the latest recorded results with date and time stamp of the
measurement. Press the Memory button again to scroll through all and
earlier recorded results.
Note:

If an irregular heartbeat is detected in any measurement, the symbol
will be displayed with the blood pressure values. Similarly, if the
measurement is taken in SmartCheck™ mode, the symbol will
be displayed with the blood pressure values.