Vaunn Medical vB100A, Руководство пользователя

Страница: 15 / 28

11
4.3 Setting date and time
The blood pressure monitor includes date and time function. For each
measurement taken, results are recorded with the date and time of the
measurement.
After battery installation, set the date and time.
1. The year YYYY should be blinking. Set year by pressing the Memory button
. To confirm, press the Time/User button .
2. The month, day and time can be set by following the same steps above.
Note:

You can change values more rapidly by holding down the Memory button
.

After initial set up, date and time can be reset. Refer to section 4.4 below.

The date and time must be re-entered each time the batteries are
replaced.
4.4 Switching sound on/off
The device beeper is on by default and can be turned off if desired. With the
device off, press the Time/User button and hold until the display shows
“bEP On”. Press the Memory button to switch between “bEP OFF” and “bEP On”.
Press the Time/User button to make your selection.