VarTech Systems VT170CM, Руководство пользователя

Страница: 7 / 30

17.0” PowerVue User Guide 150-059
All Military / Marines Displays accept both digital and analog analog RGB video signals at an
integrated connector (DVI-I). S-video or NTSC/PAL composite video signals are accepted at the
DIN connector or RCA receptacle respectively. When multiple sources are connected to the
monitor simultaneously it is possible to switch between sources using the front panel SOURCE
button. (See the following chapter on operator controls for more details.)
Digital or Analog RGB Input
When connecting the monitor to a digital signal source, it is necessary to use a cable that
terminates on the monitor end with a DVI-I connector that mates to the monitor’s connector, and on
the source end with a DVI connector appropriate to the source – usually a DVI-D connector
.
When connecting the monitor to an analog signal source, it is necessary to use a cable that
terminates on the monitor end with a DVI-I connector that mates to the monitor’s connector, and on
the source end with an HD-15 connector or with some combination of three to five BNC
connectors, as appropriate to the source.
Provided the correct cable is used, the monitor will automatically sense and adapt to any analog or
digital signals applied. In the case of analog signals, the monitor will automatically sense and
adapt to the sync type (sync-on-green, composite separate sync, or separate horizontal and
vertical syncs).
Please refer to the following figures for location of the DVI-I connector on the monitor’s rear panel.
2.4 Connecting the Display
5
Figure 1
VT170 bottom view, showing connection points
POWER
VIDEO IN FUSE
NTSC S-VHS
SERIAL 1 SERIAL 2