VarTech Systems VT170CM, Руководство пользователя

Страница: 5 / 30

17.0” PowerVue User Guide 150-059
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a sink, in a wet location where there is
standing water. Displays are provided with ventilation openings in the cabinet to allow the
release of heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard.
Therefore, NEVER:
♦
Block any ventilation slots.
♦
Place the display in a built-in enclosure unless proper ventilation is provided.
♦
Cover the openings with cloth or other material.
♦
Place the display near or over a heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
1.4
1.5
1.6
3
Unplug the display before cleaning the face of the display screen. Use a 50/50 mix of
Isopropyl alcohol and water. Apply with a slightly damp (not wet) lint free cloth. Do not use an
aerosol directly on the display screen because over-spraying may cause electrical shock.
Do not throw away the carton and packing materials. They make an ideal container in which to
transport the unit. When shipping the unit to another location, repack it in its original material.
On Installation
On Cleaning
On Repacking