29
6.3
The web interface
The web interface serves to visualise the current measured values as well as to configure settings and
functions. In the following, the necessary steps for the initial start-up
on the software-side are explained. As a
condition, the energy store must be installed according to the operating manual and the initialisation must have
been successful.
The interface of the system can change visually after software updates. Individual functions and menu items
are described in the web interface.
Further possible designations of the buttons are shown when the mouse is dragged over the button.
Note:
Click on the
information symbols shown to receive further information. You will find these in the settings
and the respective functions. Here, you should ideally use Mozilla Firefox or Google Chrome as your browser.
6.3.1
Access to the web interface
For access to the web interface, you require the serial number of the energy storage system. You will find the
serial number on the type plate on the outside of the cabinet (top).
•
Connect your storage cabinet to the router of your home network using the network cable. The port
(pos. 6 in the next image) is found on the back of the storage cabinet.
