Varmebaronen VIKING BIO 200, Руководство по установке и обслуживанию

Страница: 10 / 36

10 Värmebaronen Viking Bio 200
Installation
Pellet store
Wood pellets must be stored in a dry, airy place
protected from the weather. Ready-made pellet stores
are available on the market. These are preferable to
homemade stores.
It should be possible to remove the feed auger for
cleaning without having to empty the store.
The size of a weekly store depends on the building's
heating requirements.
Feed auger
Fuel is supplied to the VIKING BIO 200 from a pellet
store by an external feed auger.
Fit the feed auger motor on the feed auger. Tighten the
locking screw well so that the motor does not slip on
the feed auger shaft.
The feed auger must be well anchored with the chain
as it will work its way into the store.
Check the position of the feed auger before the store
is filled with pellets. Use tape or similar to mark on
the feed auger's pipe how far it extends into the store.
This makes it easy to see whether the feed auger has
worked its way into the store and it becomes easier to
refit the feed auger when it has been taken out of a full
store.
Use the enclosed hose to connect the feed auger to the
burner's quick coupler on the downpipe. The hose must
have a straight fall without sudden bends and the hose
connections must be slightly displaced from each other.
Secure the hose at both ends with hose clips.
Connect the feed auger's power cable to the power
socket on the burner.
Before starting the feed auger and the burner, the feed
auger must be filled with pellets. See 'Startup'.
Risk of crushing!
Do not insert hands or objects into the feed
auger.
The inclination of the feed auger from the
horizontal plane must be 40°±5°.
40°±5°
H dimension at 40° inclination:
1500 mm feed auger: 750 mm
2500 mm feed auger: 1400 mm
Flue gas thermometer
The enclosed flue gas thermometer is fitted to the usual
connection on the boiler's flue pipe.