Varmebaronen VIKING BIO 200, Руководство по установке и обслуживанию

Страница: 6 / 36

6 Värmebaronen Viking Bio 200
Operation
The Viking Bio 200 is a forward-burning
pellet burner designed to heat detached
houses and small properties with 6-8 mm
wood pellets.
Fuel and air are mixed in a controlled
fashion in the burner. This is the basis for
environmentally-friendly combustion and
high efficiency.
When the thermostat has reached the break
temperature, the pellet supply ceases, all
pellets are combusted and the burner stops.
When the thermostat is activated, ash
removal takes place, if the set time interval
for ash removal has been reached, before
pellets are supplied. This results in longer
operating times without the burner needing
to be cleaned.
The Viking Bio 200 can be installed on a
conventional oil or wood-fired boiler.
The Viking Bio 200 is fully automatic and
controlled by the boiler thermostat.
A temperature sensor is available as an
accessory to allow the burner to control
the temperature. The temperature control
start and stop temperatures are adjustable.
A large connection difference reduces the
number of starts and extends the operating
time.
It is advantageous to have the burner
control the boiler temperature if hot water is
produced in a heat exchanger.
Different operating modes can be selected:
full power, 3/4 power or automatic power
selection.
The burner's touch screen is used to make
all settings and to display information on
operating phases, warnings and alarms.
A feed auger, controlled by the burner, feeds
pellets to the burner from the pellet store.
The safety system in the pellet system
with the Viking Bio consists of overheating
protection, a thermal relay on the downpipe,
a non-combustible hose between the feed
auger and the downpipe, a fan with a fan
guard, flame monitoring and blocking if the
ambient temperature is high.
To simplify installation and maintenance,
the burner has quick attachments that make
it easy to attach the burner to the boiler and
remove it. Electrical connections have quick
couplers.
The burner is supplied with a connection
cable and a flue gas thermometer.