PAGE 25
Measuring the Filament Diameter
Measuring the filament diameter with a digital caliper and inputting that information into Trifecta
Software will allow you to achieve the best quality from your prints. Follow the steps below to
measure your filament.
1. Make sure to zero your caliper in its closed
position before you start. Take your caliper to a
section of the filament and lightly pinch the
filament and take a reading. In this case, the
filament diameter is 1.73 mm.
3. Finally, move to a new section on the filament
and take a third reading. Here we have 1.72 mm.
4. With the readings you have gathered, find
the average by adding the three numbers and
dividing by three.
(1.73 + 1.74 + 1.72) / 3 = 1.73mm
The final number that you end up with will be
the number you want to set in Trifecta Software.
2. Move down on the filament to take a second
reading. Here we have 1.74 mm.
Содержание Trifecta 800
Страница 1: ...Trifecta 800 3D Printer User s Guide...
