VARILITE VLZ Profile, Быстрый старт

Страница: 7 / 22

6
Connecting Power and Data
Connecting Power
The luminaire requires standard AC power distribution from AC100-240V~, 50/60Hz. Current required depends on the AC supply
voltage and product model. Refer to “Current vs. Voltage” on page 8 for all models covered in this manual.
Note: The mating Neutrik® powerCON® True1 connector is supplied; however, you will need to purchase or construct a cable
appropriate for your application.
Figure 2: Power Connector
Depending on the application, the luminaire’s AC input cable may require a different connector. If required, install a new co nnector
meeting your requirements using the following wire color code reference:
Wire* Connection
Green AC Ground
White AC Neutral
Blcak AC Line
* International (Harmonized) Standard
WARNING: DO NOT connect to three-phase service in countries with 240 volt power. AVERTISSEMENT: NE PAS se connecter au
service en trois phases dans les pays avec puissance de 240 volts.