VARILITE VLZ Profile, Быстрый старт

Страница: 10 / 22

9
Installation Procedures
Floor Mounting the Luminaire
All luminaires included in this manual are designed to sit directly on its base in a floor installation application. When used in this type of
application, be sure to leave enough space around the luminaire to allow proper, uninterrupted airflow for cooling and movement.
Hanging the Luminaire
The VLZ PROFILE Luminaire can be hung horizontally or vertically from any structure designed to work with the type of load created by this
moving luminaire. Two mounting truss hooks or other mounting hardware are required. Many compatible truss hooks are available from different
manufacturers for your particular needs. A minimum of two hooks per luminaire is required. If mounting method does not use truss hooks, two
attachment points, per luminaire, are required.
Install mounting hardware and brackets:
Step 1. Install truss hooks on two provided truss hook brackets as required as shown in Figure 4 .
Step 2. Determine required configuration of bracket installation. Brackets may be insta/lled in
many different orientations as shown in Figure 5 .
Step 3. While pulling up on locking mechanism release, fit keyed holes onto raised mounting buttons at
bottom of enclosure. Slide forward and release locking mechanism to lock in place. Ensure brackets are
locked securely.
WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is
installed on the luminaire. AVERTISSEMENT: Assurez-vous que le mécanisme de support
de verrouillage est complètement inséré après le support est installé sur l'appareil.