VARILITE VLZ Profile, Быстрый старт

Страница: 20 / 22

19
59 Beam Timing 0 - 255 255
Adjustment of fixture timing to control beam shaping
mechanisms.
- See Timing Channel Chart in User Manual
60
Gobo Timing
0 - 255 255
Adjustment of fixture timing to control gobo mechanisms.
- See Timing Channel Chart in User Manual
61
Luminaire
0 - 255 0
Control Channel used for full fixture settings, lamp controls, and
Control miscellaneous modes.
Set descreet value of desired effect, wait >3 seconds, then set
value to 0 (Idle).
0 - 5 → Idle (Default)
6 - 10 →
Full Luminaire ReCal - Also Used to Wake fixture up from
shutdown
11 - 15 → Reserved Values
16 - 20 → Reserved Values
21 - 25 → Fixture Shutdown
26 - 30 → Display - Menu ON
31 - 35 → Display - Menu OFF
36 - 40 → ReCal Position
41 - 45 → ReCal Color
46 - 50 → ReCal Gobo
51 - 55 → ReCal Beam
56 - 60 → ReCal Optics
61 - 65 → ReCal Dimmer/Strobe
66 - 70 →
Reset Fixture to Defaults - See Manual for a list of factory
defaults.
71 - 75 →
Full Luminaire Reboot. This command will reset all processors
in
fixture, then ReCal all parameters.
76 - 80 →
Fixture Status On/Off. This command will enable the display
to
show fixture status for 5 min. After this time, displays will
return
to default configuration. Repeating this command in less than
5
minutes will behave as a toggle.
81 - 85 →
Standard Mode - Fixture operates at maximum output (Default)
86 - 90 → Studio Mode - Reduced output with lower fan settings
91 - 255 → Reserved Values