background image

MVS-1C 

Page 9 

Limited Warranty 

 
The  manufactured  equipment  and  supplied  components  have  gone  through 

rigorous inspection to  assure  optimal quality  of product  and reliability. Individual 

controls  are  factory  tested  under  load,  however  the  possibility  of  equipment 

failure and/or malfunction may still exist. 

 

For  service,  contact  your  local  retailer  or  supplier.  The  warranty  period shall  be 

for two years from manufacturing date. Proof of purchase is required for warranty 

validation. 

 

In  all  cases,  the  warranty  shall  apply  only  to  defects  in  workmanship  and 

specifically  exclude  any  damage  caused  by  over-voltage,  short  circuit,  misuse, 

acts of vandalism, lightning, fortuitous events, acts of God, flood, fire, hail or any 

other  natural  disaster.  Any  unauthorized  work,  modification  or  repair  on  this 

product automatically voids the warranty and disclaims the manufacturer from all 

responsibility. 

 

The manufacturer assumes only those obligations set forth herein, excluding all 

other  warranties  or  obligations.  This  warranty  stipulates  that  in  all  cases  the 

manufacturer  shall  be  liable  only  for  the  supply  of  replacement  parts  or  goods 

and  shall  not  be  liable  for  any  personal  injury,  damages,  loss  of  profits, 

interrupted  operations,  fines  for  infringement  of  the  law  or  damages  to  the 

production of the PURCHASER and the PURCHASER shall take up the defence 

and  hold  the  manufacturer  faultless  regarding  any  legal  or  extra  legal 

proceedings, notice, or claim by the customer or by a third party, and regarding 

any  legal  and  extra  legal  expenses  and  fees  brought  forward  on  by  such 

damages.

 

 

www.monitrol.com

Содержание MVS-1C











Отзывы: