MVS-1C
Page 5
Using the MVS-1C
With the MVS-1C you can manually control a variable output. Refer to figures 2 and
3 for the location of the different switches and selectors of the controller.
Figure 2: Electronic Board and component location
15A/250V
230V
FAN
LINE
115/230V
1341 A REV.2
+
1
.
Minimum Speed
Potentiometer
This potentiometer is used to adjust the
Minimum Speed
of the fan.
That
Minimum Speed
will be the speed of the output when the
Speed Selector
is set to MIN
2
.
Voltage Selection Switch
This switch is used to select the input voltage value (115V or 230V).
[
1
]
www.monitrol.com