![background image](http://html1.mh-extra.com/html/varian/turbo-v-300-ht/turbo-v-300-ht_instruction-manual_3564979076.webp)
TECHNICAL INFORMATION
70
87-900-884-01 (C)
or twice if the display shows other parameters, either
before starting the pump or after it is operating.
If LOW SPEED is selected before starting the pump,
the display shows:
R E A D Y
F O R
L O C A L
S O F
T
S T A R T
L S
The pump reaches the Normal high speed, then
decrease the speed to the low speed value and the
display shows:
A P P R O A C H
I
N G
L S
X X
K R P M
L S
If the Soft Start has been deselected the display shows:
P U M P
R E A D Y
:
P U S H
S T A R T
B U T
T O N
L S
where: LS = means low speed mode is selected.
After starting, a LS appears on the right bottom corner
of the following displays:
S O F
T
S T A R T
O N
[
-
-
-
-
-
-
-
-
-
-
]
L S
P U M P
I
S
S T A R T
I
N G
1
2
X X
K R P M
L S
N O R M A L
O P E R A T
I
O N
X X
K R P M
L S
and when the pump reaches the low speed value, display
reverts to:
N O R M A L
O P E R A T
I
O N
3
7
K R P M
L S
With normal LOW SPEED operation, the pump will run
at about 2/3 of its nominal speed and achieves a base
pressure somewhat higher than the standard
specifications. If the gas load becomes higher, the
controller output frequency and voltage start to
decrease automatically, and the Turbo-V pump is
slowed down in proportion to the gas load until it
reaches about 3 KRPM.
If the LOW SPEED mode is selected after normal
operating condition is reached, the display shows:
A P P R O A C H
I
N G
L S
X X
K R P M
L S
while approaching the low speed value.
When the low speed mode is deselected the pump
starts to accelerate to its rotational speed. When this is
reached, the display shows:
N O R M A L
O P E R A T
I
O N
X X
K R P M