![background image](http://html1.mh-extra.com/html/varian/minivac-929-0190/minivac-929-0190_instruction-manual_3551271025.webp)
TECHNICAL INFORMATION
20
87-900-049-01
(
E
)
MAINTENANCE
Replacement controllers are available on advance
exchange basis through Varian service/sales
organization.
WARNING
High voltage in the controller can cause severe injury
or death. Before servicing, turn power off and remove
the power cable.
Troubleshooting
a. No current/voltage LED bar graph lit with mains
power ON.
−
Verify mains connections and power fuses
−
Verify on P001 that pins 3-7 are shorted.
b. VacIon pump is operating at pressures higher than
1x10
-5
mbar/Torr and only the first LED
is lit.
−
No high voltage output. Replace the unit.
c. VacIon pump operating at pressure below
1x10
-7
mbar/Ton and all LED are lit.
−
Switch power off and disconnect the high
voltage cable.
−
Switch power on and verify that only one LED is
lit. If this happens the high voltage cable or the
pump are shorted.
−
If not, replace the unit.
Controller Spares and Accessories
Description Part
number
Mating accessory connector
P001
03-648487
Fuse T 2A (5x20 mm)
Rack adapter
969-9191
Mains cable 120 Vac
USA plug
03-660441-02
Mains cable 220 Vac
European plug
03-660441-01
Controller to Vacion Pump Cables
Description Part
number
H.V. bakeable cable,
4 m long to connect
929-0191 or 929-0290
to Star Cell and new VacIon
pump series 919
929-0770
H.V. cable, 3.5 m long
to connect 929-0190 or
929-0291 to Appendage
pumps and conventional
VacIon pump series
911 and 912
924-0741
H.V. bakeable cable,
4 m long to connect
929-0191 or 929-0290 to
Appendage and conven-
tional VacIon pump series
911 and 912
929-0780