manualshive.com logo in svg

Varian 947, Руководство по эксплуатации и обслуживанию

Инструкция по эксплуатации для продукта Varian 947 теперь доступна для скачивания бесплатно с нашего веб-сайта. Этот руководство поможет вам ознакомиться с функциональностью товара и правильным использованием. Загрузите руководство с {ссылка на ваш веб-сайт} прямо сейчас!

Поделиться
Скачать
background image

Models 947, 948 and 960 Leak Detectors Operations and Service Manual 

xiv

Warranty

Products manufactured by Seller are warranted against defects in materials and workmanship for twelve (12) 
months from date of shipment thereof to Customer, and Seller’s liability under valid warranty claims is limited, 
at the option of Seller, to repair, to replace, or refund of an equitable portion of the purchase price of the 
Product. Items expendable in normal use are not covered by this warranty. All warranty replacement or repair 
of parts shall be limited to equipment malfunctions which, in the sole opinion of Seller, are due or traceable to 
defects in original materials or workmanship. All obligations of Seller under this warranty shall cease in the 
event of abuse, accident, alteration, misuse, or neglect of the equipment. In-warranty repaired or replaced 
parts are warranted only for the remaining unexpired portion of the original warranty period applicable to the 
repaired or replaced parts. After expiration of the applicable warranty period, Customer shall be charged at the 
then current prices for parts, labor, and transportation.
Reasonable care must be used to avoid hazards. Seller expressly disclaims responsibility for loss or damage 
caused by use of its Products other than in accordance with proper operating procedures.
Except as stated herein, Seller makes no warranty, express or implied (either in fact or by operation of law), 
statutory or otherwise; and, except as stated herein, Seller shall have no liability under any warranty, express or 
implied (either in fact or by operation of law), statutory or otherwise. Statements made by any person, 
including representatives of Seller, which are inconsistent or in conflict with the terms of this warranty shall not 
be binding upon Seller unless reduced to writing and approved by an officer of Seller.

Warranty Replacement and Adjustment

All claims under warranty must be made promptly after occurrence of circumstances giving rise thereto, and 
must be received within the applicable warranty period by Seller or its authorized representative. Such claims 
should include the Product serial number, the date of shipment, and a full description of the circumstances 
giving rise to the claim. Before any Products are returned for repair and/or adjustment, written authorization 
from Seller or its authorized representative for the return and instructions as to how and where these Products 
should be returned must be obtained. Any Product returned to Seller for examination shall be prepaid via the 
means of transportation indicated as acceptable by Seller. Seller reserves the right to reject any warranty claim 
not promptly reported and any warranty claim on any item that has been altered or has been returned by 
non-acceptable means of transportation. When any Product is returned for examination and inspection, or for 
any other reason, Customer shall be responsible for all damage resulting from improper packing or handling, 
and for loss in transit, notwithstanding any defect or non-conformity in the Product. In all cases, Seller has the 
sole responsibility for determining the cause and nature of failure, and Seller’s determination with regard 
thereto shall be final.
If it is found that Seller’s Product has been returned without cause and is still serviceable, Customer will be 
notified and the Product returned at its expense; in addition, a charge for testing and examination may be 
made on Products so returned.

3/1/00

Содержание 947



















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 947

CADDX Ranger 8600E User Manual preview
Ranger 8600E
Бренд: CADDX Страницы: 6
Rogers Smart Home Monitoring Manufacturer'S Installation Manual preview
Smart Home Monitoring
Бренд: Rogers Страницы: 5
OMNI-IP KNC-p3DR28V12IR Quick Operation Manual preview
KNC-p3DR28V12IR
Бренд: OMNI-IP Страницы: 36
Watt Stopper EW-105-24 Installation Instructions Manual preview
EW-105-24
Бренд: Watt Stopper Страницы: 12
Veilux VP-FDNC36X Installation & User Manual preview
VP-FDNC36X
Бренд: Veilux Страницы: 61
Clare Controls Mainline CV-M13B10-ODI Installation Manual preview
Mainline CV-M13B10-ODI
Бренд: Clare Controls Страницы: 36
Eaton Sure-Lites 2C Installation Instructions preview
Sure-Lites 2C
Бренд: Eaton Страницы: 3
Vitek Mighty DomeColor Dome Camera Series User Manual preview
Mighty DomeColor Dome Camera Series
Бренд: Vitek Страницы: 28
F&F DR-09 24V Manual preview
DR-09 24V
Бренд: F&F Страницы: 8
Avigilon 1.0C-H4A-B1 Installation Manual preview
1.0C-H4A-B1
Бренд: Avigilon Страницы: 21
Tyco SD-304C PG2 Installation Instructions Manual preview
SD-304C PG2
Бренд: Tyco Страницы: 6
Vitek Virtuoso Series Quick Start Manual preview
Virtuoso Series
Бренд: Vitek Страницы: 20
D-MAX DCC-580D Series Manual preview
DCC-580D Series
Бренд: D-MAX Страницы: 24
ProVisual CDV-2085IR-WDR User Manual preview
CDV-2085IR-WDR
Бренд: ProVisual Страницы: 7
SCW Admiral Line Software Operation Manual preview
Admiral Line
Бренд: SCW Страницы: 119
ACTi VER. 061030 CAM-6500 Quick Installation Manual preview
VER. 061030 CAM-6500
Бренд: ACTi Страницы: 13
Argo WALLNER DL-07 Manual preview
WALLNER DL-07
Бренд: Argo Страницы: 7
dallmeier CasinoCam DDF3000AV Installation And Configuration Manual preview
CasinoCam DDF3000AV
Бренд: dallmeier Страницы: 33

Бренды по названию

Популярные бренды

Загрузить еще бренды