M
AINTENANCE
:
2
0 2 . 9 6 8 5 . 0 0 1 0 0
17 -Ju ly- 200 6
15
Align Lamp For Maximum Beam Irradiance
After a new lamp is installed in a VL500A luminaire, it will be necessary to align the lamp to
optimize the beam.
Tools:
•
#1 Phillips Screwdriver
•
1/4" Nutdriver
•
Cotton Gloves or Finger Cots
•
Clean, Lint-free (Soft) Cloth
WARNING:
Remove power from luminaire before performing maintenance.
To align lamp for maximum bean irradiance:
Step
1. Remove power from luminaire.
WARNING:
Lamps will be extremely HOT after operation. Allow lamp to cool before
replacing.
Step
2. Set the luminaire head horizontally.
Step
3. Engage service tilt lock to secure luminaire head in horizontal position to access
heatsink latch.
Step
4. As shown in
Figure 5
, at heatsink assembly, open latch and swing open back of
luminaire.
Figure 5: Accessing the Reflector in VL500A Fixtures
Backcap
Latch
Arc Lamp
Assembly
Heatsink
Assembly
Содержание VL500 Wash Luminaires
