M
AINTENANCE
:
2
0 2 . 9 6 8 5 . 0 0 1 0 0
17 -Ju ly- 200 6
43
Step
7. Loosen (do NOT remove) four 8-32x7/16" PPZ screws that mount Pan/Tilt motor
assembly to Tilt Motor Slide Plate.
Figure 29: Tilt Motor Assembly Replacement
Step
8. Press motor towards spring to loosen belt tension.
Step
9. Remove belt from both drive pulley and driven pulley.
Step 10. Remove four 8-32x7/16" PPZ screws that mount Tilt Motor Slide Plate to yoke and
remove ENTIRE assembly.
Step 11. Remove four 8-32x7/16" PPZ screws that mount Pan/Tilt Motor Assembly to Tilt
Motor Slide Plate and remove Pan/Tilt Motor Assembly (be careful of spring).
Step 12. Replace by performing Steps 2 through 10 in reverse order.
Note:
When tightening four 8-32x7/16" PPZ screws that mount Pan/Tilt Motor Assembly to
Tilt Motor Slide Plate, you must tighten in a CLOCKWISE pattern starting with screw in
lower left-hand side from spring.
Spring
Tilt Motor Slide Plate
8-32x7/16" PPZ (x4)
Some components not shown for clarity.
NOTE:
Tilt Motor Assembly
Tilt Motor
Assembly
Yoke Arm Cover
8-32x7/16" PPZ
8-32x7/16" PPZ
Содержание VL500 Wash Luminaires
