step 2
Hardware included
C
D
B
A
Tools you will need
To put your under cabinet LED panel together you will need the following tools.
Cordless drill with:
• Number 2 screw tip
• 10mm drill bit
Tape
measure
IR Control Switch with cable
*Not included – sold separately
LED Driver and distributor
*Not included – sold separately
Safety
gear
Pencil
Things you need to know
• When using electrical products, basic safety precautions
should always be followed, including the following:
• Always read the instructions first before installation
• Cut off the power source during the installation
• Not suitable for outdoor use
• Don’t bend the cables
• Never operate if it has a damaged power cord or plug
• Please consider the total wattage of all lights being joined
together and select the LED Driver that is greater than this total,
taking into consideration the following:
• 15w = max load 13.5w
• 30w = max load 27w
• 75w = max load 67.5w
• If you have any questions, contact us on:
Australia:
1800 666 078
Monday to Friday between
8:00am and 6:00pm AEST, New Zealand:
0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email:
.
bridge connector
x 1
extension cable
x 1
16mm screws
x 2
(400/450 LED Panel)
16mm screws
x 3
(600/900 LED Panel)
25mm screws
x 2
(400/450 LED Panel)
25mm screws
x 3
(600/900 LED Panel)
installation guide
p.
1
Ver. 1
W50556
W50557
W50558
W50559
Follow these
instructions to
build and attach
your under cabinet
LED Panels.
under cabinet LED panel
