background image

user manuaL

w w w.Va r i - L i t e .co m

VL1600 ProfiLe

34

to save the current log file to a USB Flash Drive:

Step 1. 

Insert a USB flash drive (not supplied, by others) into luminaire’s USB port.

Step 2.  Step 2. Press [ESC].
Step 3.  Press [UP] / [DOWN] arrows until Fixture appears. Press [OK].
Step 4.  Press [UP] / [DOWN] arrows until USB appears. Press [OK].
Step 5.  Press [UP] / [DOWN] arrows until USB Log appears. Press [OK].
Step 6.  Press [UP] / [DOWN] arrows until DOWNLOAD appears. Press [OK].
Step 7.  Once the download is complete, the display will read “Reset Current Lum error lognfile?” Press [OK] 

to reset or [ESC] to exit.

Step 8.  Press [OK] to clear the current log file in the luminaire or [ESC] to keep it.
The .csv log file on the USB Flash Drive can be read via any computer system. The file name will be as follows: 

26KSxxxxx.csv (the xxxxx will be the unique luminaire ID of the fixture). Each log file contains labels and values 

as shown below.

PARAMETER

EXAMPLE

MEANING

model

Vl1600 Profile 

The fixture model

Fixture Hours

142

The total of number of hours the fixture has been operating

DmX address

1

Current DmX address of the fixture as set by the user

rDm uID

56:4c:2f:0:7:2a

refer t

rDm ParameterS oN PaGe 26

luminaire ID

1834

Current luminaire identification number

software Version 1/6/2015

Current software version loaded in the fixture

DmX map

16-bit 

Current DmX mode setting (16 bit )

swap Pan/Tilt

no

Current pan and tilt setting

Invert Pan

no

Current pan operation setting

Invert Tilt

no

Current tilt operation setting

lamp Power up

lamp off

Current lamp Power up option setting (lamp Off, lamp On, or Cal On)

lamp level

standard

Current operating mode of the fixture (standard)

lamp strikes

518

Total number of lamp strikes initiated by the fixture

lamp Hours

140

Total number of lamp hours since the last lamp hour reset

Fixture Hour

error Type(s)

lists any errors and their associated fixtures hour (in example shown, a 

pan error occurred at fixture hour 138)

138

Pan no sensor

Содержание VL1600 Profile





































Отзывы: