Technical Manual: TM80030
THERMICA WATER TO AIR COOLER
Model range: THERMICA10-VV-MMM-LLL
Revision: 1.0
Date of release: 2022-12-16
20/55
www.vareximaging.com
3.
Installation
This chapter describes the instructions for installation of the Cooler.
3.1.
Lifting and transportation
The packaging of the cooler is designed to avoid damage during transport, storage or lifting.
The cooler and its packaging weights about 35kg and need to be handled with two persons. The carton
box is equipped with four handles to lift the box with two persons. Make sure that the packing straps are
in place before lifting is taking place.
The cooler weights 33kg and need to be handled with two persons. There are two handles present at the
cooler to make lifting easier.
3.2.
Installation and maintenance tools
The following tools are recommended or required to install the Cooler:
Recommended or required tools
Tool
Description
Used for
A
Torx key size T25
To open housing
B
Wrench size 21
Opening/closing sealing cap hydraulics
C
Large screwdriver, tip max. thickness 1.4mm Opening/closing ball valve and sieve cap
D
Small screwdriver, tip max. thickness 0.8mm Mains wire connector e.g., Binder 99 4222 00 04
E
Crimp tool (Binder 66 0001 014 100)
Crimp pin connector Binder 61 798 085 00 (Binder
housing female counterpart 99 6518 000 12)
F
Appropriate stripping tool suitable for wires Connector Binder
G
Appropriate tools for connecting hydraulics Depending on which hydraulics are used
H
Insulated crimp ferrules suitable for 1.0mm2
(AWG 18) wires e.g., Phoenix Contact
3200030.
Mains wire connector e.g., Binder 99 4222 00 04
J
Crimp pliers for ferrules e.g., Phoenix Contact
CRIMPFOX 6H 1212046.
Insulated crimp bootlace ferrule (H)
CAUTION:
Use intended and proper tools for mounting and connection of the Cooler to the X-ray
source. Inspect tools before use; never use defective or worn tools.
WARNING:
Two persons are required two lift the cooler in and out of its packaging
WARNING:
The packing straps should be in place before the cooler in its packaging is lifted
