Vaporless ISM-4080, Руководство по установке и эксплуатации

Страница: 8 / 24

8
•
UP Arrow
Increase a numeric value. If max value is reached, numbers will roll over to
lowest value. Holding down the button will speed up the counter.
•
DOWN Arrow
Decrease a numeric value. If min value is reached, numbers will roll over to
highest value. Holding down the button will speed up the counter.
•
CLEAR
- Resets a numeric value to original setting.
•
ENTER
- To choose a value or setting.
C
ONFIGURATION
:
Before proceeding, it is important to determine if the ISM you are using is preconfigured or not.
When the ISM-4080 boots it will show the following screen:
ISM-4080
Version 3.XX
If the unit is not configured this message will stay on the screen after 10 seconds. If this is what shows
on your screen, follow from MENU next.
If the unit is configured, the boot screen will display for about 10 seconds and then move to the Home
Screen. The home screen will look something like this:
P=1 T=1L PRES=HI
MONITOR AL=N
This screen will rotate through all active products and channels showing the status of each. If the home
screen appears on the ISM-4080, Move down to 2
nd
MENU below.
M
ENU
:
The
MENU
button is used to enter specific information about the station and how it is to operate. When
the MENU button is pushed, a Category will be displayed. Press ENTER to access the menu categories.
The first Category needed is
SITE CONFIGURATION
. The Category and responses are listed below.
Push
MENU
–
RUN TIME SETUP
Push MENU –
REPRESSURE
DISABLE TIME
Push
MENU
–
SUMP SENSOR
SETUP
Push
MENU
–
TEST SETUP
Push
MENU
–
SET DATE/TIME?
Push MENU –
SITE
Facility Configuration
CONFIGURATION
Push
ENTER
–
NUM OF TURBINES
This is the Category, the 2
nd
line is the fill-in