www.vanco1.com
800.626.6445
8
CONNECTION WITH
HDBASET POH RECEIVER
The EVMX4K04 boasts 4 HDBaseT output ports which support PoH. Connect the HDBT output ports of 4K HDBaseT 4x4
Matrix Switcher to the HDBaseT Receivers supporting PoH (like EVRXHD1) via twisted pair. Plug a power supply to the power
port of 4K HDBaseT 4x4 Matrix Switcher, the HDBaseT Receivers will be powered by the matrix through thesingle twisted pair
cable.
FRONT PANEL BUTTON CONTROL
1) To convert one input to an output:
Operation: ENTER Example: input 1 to output 2
Note: In default status, 4 IR OUT sockets correspond with 4 HDMI INPUTS. When you convert an HDMI input to an output, the
corresponding IR OUT will be switched synchronously.
2) To convert an input to several outputs:
Operation: output + output +… + ENTER
Example: Switch input 2 to output 2, 4
3) To convert an input to all outputs:
Operation: ALL+ ENTER
Example: Convert input 1 to all outputs
Note: Indicators of the pressed buttons will blink green for three times if the conversion is done, then it will be off. If the
conversion failed, they will be off immediately.
PoC
DC 24V
Receiver(PoC)
