www.vanco1.com
800.626.6445
6
BACK PANEL DESCRIPTIONS
1. IR ALL IN: Input port for IR control signal, connect with IR receiver, deliver IR signal to all the HDBaseT
ports to control the remote devices.
2. HDMI INPUTS: HDMI input ports, 4 in total, type A female HDMI connector, connect with HDMI input
source devices.
3. IR OUT : Connect with IR transmitter, to emit the IR signal sent from the HDBaseT ports of the far-end
Receiver. These IR OUT sockets make up an IR matrix with the IR IN sockets on the HDBaseT receivers,
and all IR signals can be switched simultaneously with the AV signal, or separately switched.
4. Outputs
1-4:
A. IR IN: Connect with IR receiver, fixed IR input for the output, cannot be
switched separately. It makes up an IR bi-directional transmission with the IR
OUT on the corresponding HDBaseT receiver.
B. COAX: HDMI de-embedded digital audio output.
C. RS232: Serial port to communicate with the RS232 port on corresponding
HDBaseT receiver. When controlled by the HDBaseT receiver, the communication
protocol must be the same with 4K HDBaseT 4x4 Matrix Switcher.
D. HDMI: HDMI output port, connect with HDMI displayers, deliver same input
signals with HDBaseT ports, split HDMI output for local monitoring.
E. HDBaseT: Works with HDBaseT Certified EVRXHD1 receivers. It can extend
AV, IR and RS232 signal to 70m distance. Meanwhile, it can provide power for
the receivers which support PoH.
F. AUDIO: HDMI de-embedded stereo audio output
5. IR EYE: Connect with extended IR receiver, use the IR remote to control 4K HDBaseT 4x4 Matrix Switcher.
6. TCP/IP: TCP/IP port for unit control
7. RS232 : Serial port for unit control, 9-pin female connector, connects with control device such as a PC.
8. Power Indicator: Illuminate red when powered on.
9. DC 24V: Connect with DC 24V power adaptor.
10. GROUND: Connect to grounding, make the unit ground well.
1
2
3
A
4
B
C
D
E
F
5
6
8
7
9
10
