www.vanco1.com
800.626.6445
5
1. KVM LED Indicators:
a. Left indicator led illuminates solid when the TX is connected to a source via USB
b. Right indicator
b.1. LED flashes when there is a connection between the TX and RX units
b.1.1. Led flashes rapidly when there are USB signals being transferred
b.2. LED flashes slowly when there is no connection between TX and RX units (check cabling
between both units if this occurs)
2. Reset: Press to reset/restart the extender
3. Cat6 Output: Connect a Cat6 cable with no coupling points, patch panels, etc. to the RX unit
4. Power/Signal LED Indicator:
a. Illuminates solid when connected to an HDMI source
b. Flashes when the extender is powered on, however no HDMI source signal is present
5. DC 12V: Connect the included 12V/2A power supply to power the extender unit (Powering this unit up
requires no power supply needed at the RX unit)
6. HDMI Loop-out: Connect a local display or monitor
7. HDMI Input: Connect a source such as a Security NVR/DVR, computer, NAS system, etc
8. USB type A port: Connect the included USB cable to the host/source device for KVM control
PANEL DESCRIPTIONS
EVEXKVM3-TX (Transmitter Unit)
4
5
1
2
3
6
7
8