www.
vancare
.com
2
2
Electro a netic om liance ata For Vancare
G-Series Lift
Recommended separation distances
between portable and mobile RF communications equipment and the [EQUIPMENT or SYSTEM]
The [EQUIPMENT or SYSTEM] is intended for use in an electromagnetic environment in which radiated RF disturbances are control
LED. The customer or the user of the [EQUIPMENT or SYSTEM] can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the [EQUIPMENT or SYSTEM]
as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
M
150 kHz to 80 MHz
d
= 1.2√
P
150 kHz to 80 MHz
d
= 1.2√
P
800 MHz to 2,5 GHz
d
= 1.2√
P
0,01
0.12
0.12
0.23
0,1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m)
can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1
: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Disposal
•
The
Vancare
G-Series Lift
doesn’t contain any dangerous goods.
•
The components of the
Vancare
G-Series Lift
should be properly disposed at the end of its shelf-life.
• Make sure that the materials are carefully separated.
•
The electrical conducting boards should be submitted to an appropriate recycling
proceeding.
• The rest of the components should be disposed according to the contained materials.
