Vancare G Series, Инструкция по установке и эксплуатации

Страница: 16 / 24

16 Vancare
Inspection and Maintenance
Prior to using the Vancare
G-Series Lift,
the inspections should be conducted per the following schedule:
Item Before Use Every Month Annual Every Two Years
G-Series Lift
•
Ensure that end stops are installed •
Inspect strap for wear or fraying •
Ensure Batteries are charged •
Inspect carry bar for damage or sharp edges •
Inspect the wheels in the trolley. Replace if damaged. •
Sling
Check all straps for wear or fraying
•
Inspect the sling for any damage in the fabric •
Ensure there are no loose threads in the stitching •
Maintenance by a certified technician
Replace the strap
• •
Inspect the gearbox and carry bar (check for cracks) •
Inspect the gears for any broken or worn teeth •
** Verify the overspeed cam is operating freely •
Check emergency stop cord •
** Check emergency lowering device •
*Annual load test with SWL (maximum safe working load) •
Ensure the end stops are installed •
* In accordance to the ISO 10535 Standard “Hoists for the transfer of disabled persons – Requirements and test
methods” an inspection should be performed on the
G-Series Lift
at least once a year. This inspection should be
performed by a qualified technician and should include a working load test of one (1) lifting cycle with the maximum
load.
** These two functions must be checked by a qualified technical to ensure the essential performance of the
G-Series
Lift.
!
Do not operate the
G-Series Lift
until any issues discovered during the inspection have been
addressed by a certified technician.