Vancare C450, Техническое руководство

Страница: 29 / 50

LCD Display & Programming Functionality
•
Default Display Modes :
−
The user can set either of the following as the ‘Default’ display mode:
1.– Battery Level (the factory setting for the Default Display Mode); or,
2.– Number of Lifts.
−
In Battery Level Mode the lift will:
1. Display the word, “Battery”, with the percentage charged (in 10% increments) in
the top row of the display (e.g., “Battery Level 60%”).
2. Display a “Bar Graph” of the battery level in the second row of the display by
displaying the appropriate number of fully blackened rectangles as in the
following diagram (note: as there are 12 characters, the charge percentage will
be divided by 8.333 and rounded DOWN to determine how many rectangle
characters are shown):
% B a t e r y 0 5 t
−
Note: As the lift is initially switched on, the level of battery charge displayed may be
incorrect. However, as soon as the lift is actually operated, the charge level will update
to the correct level.
−
In Number of Lifts Mode the lift will:
3. Display the word, “Lifts”, with the number of lifts completed in the top row of the
display (e.g., “Lifts 500”) and a bar graph to indicate the battery level as in
Battery Level Mode:
L i f s , t x x x x x
−
In any ‘Default display mode’, if the battery levels fall below 25%, the lift will go into Low
Battery Mode. The lift will then:
4. Make an audible beeping sound every ten (10) seconds.
5. The display should flash “Low Battery” in the first line.
6. The bars indicating charge level should flash on and off.
C-450/C-625 Technical Manual 031417 Page 29