Vancare C450, Техническое руководство

Страница: 22 / 50

E6 - Repair C-450/C-625 Constant Charger System
IMPORTANT NOTE:
Use extreme caution when performing internal servicing on the lift.
Ensure
that the battery has been disconnected before starting.
1.
The bearings and contact strips can become dirty, oily, and corrode in very humid and acidic
environments. The first step to repairing a faulty connection is to wipe the bearings and
contact strip in the track with a clean rag. If problems persist, the following steps outline how
to replace the constant charger system.
2. Ensure that the RED battery lead has been disconnected
.
3.
Remove the charger block screw and nut that holds the constant charger to the trolley base.
4.
Cut the cable tie that holds the constant charger wire to the trolley base.
5.
Unplug the constant charger cable to the circuit board.
6.
Remove the constant charger unit, and replace with a new unit.
7.
Reconnect the charger block screw, cable tie, and cable to the circuit board. Ensure that the
wire does not conflict with the wheels or any movement along the track.
8.
Test system to ensure that charging is occurring.
Unscrew Screw Cable to Circuit Board Cable Tie Wire Holder
C-450/C-625 Technical Manual 031417 Page 22