VAL
S
TEAM
ADCA
Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment Directive.
IMI P130.08 E 00.20
25
11. DISPOSAL
Once the product has reached the end of its working life, it should be sent for disposal in
accordance with the prevailing national and local regulations.
Before disposal make sure that the product is clean and free from fluid residues.
During its disposal, pay special attention to rubbers, resins and polymer components
(PVC, PTFE, PP, PVDF, FKM, NBR, etc.).
Do not dispose of components and hazardous substances together with household
waste.
12. RETURNING PRODUCTS
Information regarding hazards and precautionary measures to be considered due to
contaminating fluids and residues or mechanical damage that may represent a health,
safety or environmental risk, must be provided in writing when returning products to
VALSTEAM ADCA.
RISK DUE TO PRESENCE OF HAZARDOUS RESIDUES ON
RETURNED PRODUTS
Contaminated fluids and residues may represent an environmental risk, or
risk to VALSTEAM ADCA personnel.
• Information regarding any hazards or precautionary measures to be considered
must be provided in writing when returning products to VALSTEAM ADCA.
•
Health and Safety information sheets relating to any substances identified as
hazardous or potentially hazardous must be provided outside the packaging.
•
Use Hazmat labels on the packaging.
WARNING
IMPORTANTE NOTE
Total or partial disregard of these Installation and Maintenance Instructions involves
loss of any right to warranty.
The extent and warranty period are specified in the “General sales conditions”.
