VAL
S
TEAM
ADCA
Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment Directive.
IMI P130.08 E 00.20
12
If the transport packaging has any shipping damage contact VALSTEAM
ADCA or its representative.
NOTE
Before storing and transporting the product protect it from impacts and mechanical
damage, paying special care with sealing surfaces and other fragile parts.
4. INSTALLATION
Before performing any installation work, refer to section 1 – Safety information.
RISK OF INJURY DUE TO INSUFFICIENT SUPPORT
DURING INSTALLATION
Insufficient support of the product during installation may cause it to fall and
cause personal injury.
• Ensure the product is safely
held in place during installation.
• Wear protective safety shoes.
WARNING
RISK OF INJURY AND PRODUCT MALFUNCTION DUE TO
PRESSURIZED SPRING CHAMBER
Plugging or isolating the captured vent/leakage line connection in a self-
relieving regulator will result in pressurization of the spring chamber, altering
the regulator set pressure and causing medium to escape and/or components
to be projected at high speed during disassembly.
• The captured vent/leakage line connection must be kept depressurized.
CAUTION
RISK OF PRODUCT DAMAGE DUE TO STRESS
The product is not intended to withstand external stresses that may be
inducted by the system to which it is being connected to.
• Make sure that the connected pipe does not subject the body to any stress
(forces or torques) during installation and operation.
• Do not use the product as an elevation point.
NOTICE
