Service and Installation Manual
1
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
ICE MAKER SAFETY
our safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to
potential hazards that can injure or kill you and others. All
safety messages will follow the Safety Alert Symbol and
either the words “DANGER”, “WARNING” OR
“CAUTION”.
DANGER means that failure to heed this
safety statement may result in death or
severe personal injury.
WARNING means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
CAUTION means that failure to heed this
safety statement may result in minor or
moderate personal injury, or property or
equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how
to reduce the chance of injury, and let you know what can happen if the
instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock or injury, when using your
ice maker, follow these basic precautions:
•
Plug into grounded 3-prong outlet
•
Do not remove grounding prong
•
Do not use an adapter
•
Do not use an extension cord
•
Disconnect power before cleaning
•
Disconnect power before servicing
•
Replace all panels before operating
•
Use 2 or more people to move and install ice maker
SAVE THESE INSTRUCTIONS
Service and Installation Manual
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
26
When this LED is on, the unit is working in the cleaning mode.
6.
Cleaning Recommended (White) LED:
Cleaning Recommended indicator
light
When this LED is on green shows the water filter work well. When this
LED is on yellow shows the water filter work well but approaching working
bad. When this LED is on red shows the water filter should be replaced by a
new one.
7.
ICE button
While the unit is in Stand-by mode (all LEDs is on), you can press ICE
button to start the Automatic Ice Making procedure. The green ice making
indicator light will be on.
8.
CLEAN button
While the unit is in Stand-by mode (all LEDs is on), you can press CLEAN
button to start the Automatic Clean procedure. The green Clean Cycle
indicator light will be on.
9.
STANDBY button
While the unit is in ice-making or cleaning mode, you can press STANDBY
button to enter the Stand-by mode
：
A-
When the unit is in ice-making stage, and you press the STANDBY
button, ice machine will enter the ice harvest mode directly (ice harvest
indicator light will be on). After ice harvest is over, the unit will drain
out the water in the water tank (standby indicator light will flash).
Then the unit will be in the Stand-by mode, and the standby indicator
light will be on.
B-
When the unit is in ice harvest stage, and you press the STANDBY
button, after ice harvest is over, the unit will drain out the water in the
water tank (standby indicator light will flash). Then the unit will be in
the Stand-by mode, and the standby indicator light will be on.
C-
When the unit is in bin full, water enter water tank or cleaning stage,
and you press the STANDBY button, ice machine will drain out the
water in the water tank directly (standby indicator light will flash).
Then the unit will be in the Stand-by mode, and the standby indicator
light will be on.
IMPORTANT:
•
The ice cube size is set well before the ice machine packaging in the factory,
if it is not necessary, we do not recommend adjust the ice cube size often.
