Service and Installation Manual
7
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
Ice scoop
Water supply pipe
12mm, 2-1/4"O.D.
Drain hose
23mm
Water sprinkler
Water curtain axle
Silicone plug
Drain outlet G3/4"
Water inlet G3/4"
Ventilation shield
Back view
Power cord
1.8m
Front view
Water inlet connector
G3/4"-1/4"O.D.
Seal gasket
Inlet
Outlet
VPIM-55/85/280
Ice Maker Installation
Ø
Ø
Service and Installation Manual
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
20
What should be kept clean
There are 4 things to keep clean:
1.
The exterior
2.
The interior
3.
Water sprinkler
4.
The ice-making system cleaning
Exterior Cleaning
The door and cabinet may be cleaned with a mild detergent and warm water
solution such as 1 oz of dishwashing liquid mixed with 2 gallons of warm
water. Do not use solvent-based or abrasive cleaners. Use a soft sponge and
rinse with clean water. Wipe with a soft clean towel to prevent water spotting.
Clean stainless steel with a cloth dampened with a mild detergent and warm
water solution. Never use an abrasive cleaning agent.
Interior Cleaning
The ice storage bin should be sanitized occasionally. Clean the water tank
before the ice cube machine is used for the first time and reused after stopping
for an extended period of time. It is usually convenient to sanitize the trough
after the ice-making system has been cleaned and the ice storage bin is empty..
1.
Switch off the unit
NOTE: If there is some rest water in the water tank, just plug in and
through press the STANDBY followed by CLEAN button to drain out
the water. When the ice machine is in the Stand-by mode, unplug unit.
2.
Using a sanitizing solution made of 1 ounce of household bleach and 2
gallons of hot water (95º to 115ºF), clean the water tank, evaporator cover,
body surface and the ice bin with a clean cloth. To clean hard-to-reach
corners, apply the sanitizing solution with a spray bottle.
3.
Rinse thoroughly with clear water. This completes the routine interior
cleaning of the unit.
4.
Reconnect the power.
5.
In Stand-by mode
，
press the CLEAN button, then press the STANDBY
