Slider Control models - 600FS & 800FS
Lighting the fire.
-
Push the slider handle to the LEFT as far as possible till the ignition position is
reached, several sparks will occur
between the electrode and pilot tip. Hold in this
position till the pilot flame has heated the thermocouple sufficiently to hold.
Approx. 5 - 15 seconds.
Adjusting flame height.
When the burner is operating step the slider handle to the RHS, increments will be
felt as the slider moves giving you the following outputs;
Position 1
- After ignition Front burner is on LOW
Position 2
- Moving slider handle one increment to RHS, front burner is on HIGH.
Position 3
- Moving slider handle one more increment to the RHS, Rear burner on
HIGH ignites (along with the Front burner remaining on HIGH)
Position 4
- Moving the slider as far as possible to the RHS is OFF
Note: There is no
pilot only setting on the Slider (FS) models.
Turning off.
To turn the fire off push the slider as far as possible to the RHS.
Page 53
©
GDC Group Ltd. AUG 2016
OWNER GUIDE
