6. PACK CONTENTS
The items required for this appliance are packed in sections.
The Ceramic/Vermiculite/Glass liner options are all fragile so care necessary
when handling. They are packed inside the top fitment as you open the carton.
Section 1 - Fire unit contains:
1
Burner and convection box unit.
1
Log fuel effect set
1
Literature packs
1
Frameless kit
(ONLY If ordered instead of a Trim)
Section 2 - Accessory box contains:
1
Wall liners set
1
Self adhesive foam seal
2
Self adhesive foam seal
(ONLY with Frameless kit extra foam seal)
7
Wood screws
7
Wood Wall plugs
2
Cable clamps
2
Fire retaining cables
4
Eyebolts
2
Floor sealing tape
1
‘T’ connector and pressure test point.
1
Nut and olive for 8mm inlet pipe.
1
Smoke match tube
1
Ember wool
(600 Models approx 1 gram / 800 Models approx 2 grams)
1
Slider handle
(FS only)
2
M4 x 8 machine screws
(FS only - to secure the Slider handle)
1
Alkaline ‘AA’ Battery
(FS models only)
1
8 button remote control handset. (RC models only)
2
Alkaline ‘AAA’ Batteries.
(RC models only)
1
Battery box
(RC models only)
4
Alkaline ‘AA’ Batteries.
(RC models only)
1
Tray filler
(Only on models with Glass liners selected)
2
Side wall glass spacers
(Only on models with Glass liners selected)
4
No.8 x 3/8” Tapping Screws
(Used to fit the side wall spacers)
Section 3 - Trim pack contains:
1
Trim.
4
Square magnets
(Used to secure Trim onto engine)
Carefully remove all the contents. Take special care in handling the ceramic pieces.
Check that all the listed parts are present and in good condition.
Page 19
©
GDC Group Ltd. AUG 2016
INSTALLER GUIDE
