To re
fi
t the window:
1. To re
fi
t the window, place the window to the
fi
rebox’s
opening frame.
Make sure that the wider part of
the window frame is at the bottom. The top of
the window is marked.
2. While you hold it, push in and turn the two
bottom spring-loaded bolts a quarter turn to
engage their pin.
3. Push in the top of the window against the
fi
rebox
and fasten the two top spring-loaded bolts a
quarter turn.
4. Then, pull out the top and bottom of the window
and release it to insure the springs return it.
5. Apply firm hand pressure around the window
frame to ensure the window is sealed tight
against the firebox.
6.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
7.
Reinstall the front and barrier screen.
WARNING
F O R S A F E T Y P U R P O S E , ensure the
barrier screen is re-installed on the
fi
replace
front after maintenance.
!
Servicing & Maintenance
Hot Glass Plate
WARNING
Failure to install the window correctly can
leak carbon monoxide, a
ff
ect the performance
of the
fi
replace, damage components, cause
overheating resulting in dangerous conditions.
Damage caused by incorrect window installa-
tion is not covered by the Valor warranty.
!
DANGER
The window unit must be correctly installed,
fastened and sealed after servicing or
serious bodily injury and/or damage to the
appliance may result.
To ensure a safe operation:
•
Double-check that the bottom of the window
frame is correctly installed in the bottom
support railing/tabs;
•
Verify that the bolts are hooked properly to
the window tabs then;
•
Pull out the top of the window and release it
to insure the springs return it;
•
Ensure the window is sealed before operation.
!
14
OWNER’S
INFORMATION
