Valor 2200JN, Инструкция по установке и эксплуатации

Страница: 8 / 76

8
Owner’s Information
To refi t the window:
1.
Remove any fuel bed media particle from
the window bottom rail before installing the
window.
2. Ensure the gasket is well fi tted to the bottom of the
window pane.
3. Insert the window behind the appliance’s front panel
and lower it into its bottom rail.
4. Push the top of the window pane against the fi rebox.
Ensure it is centered on the fi rebox so it seals
properly
.
5. While you hold it, pull down and hook one of the
spring-loaded levers onto the window top black frame
using the door handle. Repeat with the other lever.
Bottom railing
Window pane
side frame
WARNING
Failure to install the window correctly can
leak carbon monoxide, aff ect the performance
of the fi replace, damage components, cause
overheating resulting in dangerous conditions.
Damage caused by incorrect window installa-
tion is not covered by the Valor warranty.
!
DANGER
The window unit must be correctly installed,
fastened and sealed after servicing or serious
bodily injury and/or damage to the appliance
may result.
To ensure a safe operation:
•
Double-check that the bottom of the window
frame is correctly installed in the bottom
support railing;
•
Verify that the levers are hooked properly to
the window tabs then;
•
Pull out the top of the window and release it
to insure the springs return it;
• Ensure the window is sealed before operation.
!
6. Apply fi rm hand pressure around the window pane
particularly on the top and sides
to ensure the
window is sealed tight against the fi rebox.
ENSURE THE FRONT
WINDOW’S SILICONE
GASKETS ARE WELL
SEALED, FROM TOP TO
BOTTOM, TO THE SIDE
WINDOWS!
OWNER’S
INFORMATION