18
AUTOMATIC TURN DOWN
AUTOMATIC SHUT OFF
LOW BATTERY INDICATION
HANDSET / RECEIVER MATCH
Remote handset:
The battery icon will show when
the battery needs to be replaced. Replace with one 9 V
alkaline
battery.
Remote battery holder:
Frequent ‘beeps’ for 3 seconds
when the valve motor turns indicate the batteries need to
be replaced. Replace with four 1.5 V
alkaline
batteries.
The remote control handset and receiver are programmed to
function together. In case of a replacement of the handset or
the receiver, you will need to reset the receiver to allow them
to function together. Contact your dealer for details.
•
No communication.
If there is no communication
between the receiver and the handset for a period of 6
hours, the appliance goes into pilot mode.
•
No change in fl ame height.
If there is no change
in fl ame height for a period of 6 hours, the appliance
goes into pilot mode.
NOTE:
In
TEMP
or
TIMER
modes, the fl ame height
will vary according to room temperature. The appliance
will continue to work normally. However, if the room
temperature remains the same for 6 hours, the appli-
ance will go into pilot mode.
•
Low batteries in the remote battery holder.
With low
battery power in the remote battery holder the system
shuts off completely.
NOTE:
This does not apply when the power supply is
interrupted.
•
No change in pilot.
The appliance shuts off
completely when it is continually in pilot position—
without any change—for a period of 5 days.
CAUTION
DO NOT USE
a screwdriver or other metallic object
to remove the batteries from the battery box or the
handset! This could cause a short circuit.
Timer Programming Example (default temperatures shown)
6:00 a.m.—
P
1
Start time
4:00 p.m.—
P
2
Start time
6:00 a.m.—
P
1
Start time
8:00 a.m.—
P
1
End time
10:00 p.m.—
P
2
End time
Set temp 74˚F
Set temp 40˚F
Set temp 74˚F
Set temp 40˚F
Remote Control Operation
OWNER’S
INFORMATION
Содержание 2200JN
Страница 74: ......
