Valor Fires VALORFIRES 847, Инструкция для установщика и владельца, Страница: 9 / 32

5. FITTING THE FIREFRONT
Important: Before continuing with the installation of this firefront please ensure
that you have completed the information on the last page of the owner guide.
This includes boiler information.
It is important to install the boiler before installing the firefront.
Please read this section thoroughly before positioning the firefront.
Fitting the batteries to the remote control handset.
The remote control handset uses 2 x 1.5V AAA type batteries. For longer battery life
use only alkaline batteries. To install the batteries, slide the cover down on the rear of
the handset and remove. The polarity of the batteries is marked on the inside of the
battery compartment.
If the firefront does not respond to the remote control handset commands, it is likely
that the batteries are faulty or require replacement.
Fitting the cable clamp.
If the mains cable is to be routed to the left hand
side of the firefront there is a cable clamp
supplied with the firefront to hold the cable in
place. This prevents the cable being trapped
under the firefront during installation. Fit the cable
clamp as in figure 3.
INSTALLER GUIDE
Page 9
©
Baxi Heating U.K. Limited 2009.
Figure 3. Fitting the cable clamp
Contents Quantity (Illustrations are not to scale)
Boiler Control and
connector lead.
1
Figure 2. Contents continued