
©
Baxi Heating U.K. Limited 2009.
Page 20
Manual Control - What is it and why is it there?
The manual control is there as a back up. If the remote control has been damaged,
lost, or the batteries lives have expired, the manual control will enable the
effect and heater to be operated.
The control is located at the bottom left hand corner of the firefront. On Dream
models it will be necessary to remove the lower ash pan.
What does the button do?
Press the button once.
This turns the
effect on. The indicator
lamp (see figure 2) will flash green for approximately five
seconds, after this time the lamp will no longer be
visible.
Press the button a second time.
This will turn the 1 kW heater on. The
effect will already be on. The indicator lamp will flash
amber for approximately five seconds, after this time the
lamp will no longer be visible.
Press the button a third time.
This will turn the 2 kW heater on. The
effect will already be on. The
indicator lamp will flash red for approximately five seconds, after this time the lamp
will no longer be visible.
Press the button a fourth time.
Pressing this button at any time whilst the
effect or heater are in
operation will turn the
effect and heater off.
OWNER GUIDE
Figure 3. Manual control
Содержание VALORFIRES 847
Страница 28: ...Page 28 Baxi Heating U K Limited 2009 OWNER GUIDE...
Страница 29: ...Page 29 Baxi Heating U K Limited 2009 OWNER GUIDE...
Страница 32: ...Baxi Heating U K Limited 2009...