Valor Fires VALORFIRES 847, Инструкция для установщика и владельца, Страница: 19 / 32

©
Baxi Heating U.K. Limited 2009.
Page 19
1. OPERATING THE FIREFRONT
Never cover the firefront or obstruct the opening at the base of the firefront,
this could cause overheating and consequent risk of fire.
The firefront can be controlled by the manual control located on the lower left hand
side of the firefront or by using the remote control handset. These controls are for the
firefront only and have nothing to do with the operation of the boiler. For boiler
operation see section 2 of this owner guide.
Remote Control - What do the buttons do?
Pressing the red ‘ON/OFF’ button.
To activate the remote handset it is necessary to press the red
ON/OFF button. The status lamp on the firefront will turn red - see
figure 2).
Pressing the ‘LAMP’ button.
This turns the effect on. The indicator lamp will
flash green for approximately five seconds, after this time the lamp
will no longer be visible.
Pressing the ‘Heat 1’ button.
This turns the effect and 1 kW heater on. The
indicator lamp will flash amber for approximately five seconds,
after this time the lamp will no longer be visible.
Pressing the ‘Heat 2’ button.
This turns the effect and 2 kW heater on. The
indicator lamp will flash red for approximately five seconds, after
this time the lamp will no longer be visible.
Pressing the red ‘ON/OFF’ button.
Pressing this button at any
time whilst the
effect and
heater are in operation will
turn the
effect and heater off.
Figure 2. lamp locations
Figure 1.
OWNER GUIDE