Valor Fires 870 hydroflame Dream, Инструкция для установщика и владельца

Страница: 8 / 28

4. FITTING THE HEATER
Important: Before continuing with the installation of this heater please ensure
that you have completed the information on the last pages of the owner guide.
General notes to read before fitting your heater.
Pipes and temperature settings.
Hydroflame
®
Dream is designed for use on standard two-pipe pumped central
heating systems with a maximum water temperature of 86°C and a maximum
pressure of 6 bar (88lbs/in2). Pipes are 15mm and may be used either as flow or
return.
Hydroflame
® Dream is not suitable for one-pipe systems.
Hydroflame® Dream is fitted with an internal low temperature cut-out device that
prevents the fan operating until the central heating system water has reached a set
temperature. This is factory set at 40°C but is adjustable for higher or lower
temperatures (See note at the end of section 6).
The flexible installation hoses supplied are suitable for use with either 15mm diameter
copper pipe or cross-linked polyethylene barrier pipe to BS 7291.
Location.
To avoid the possibility of vibration, ensure the fire opening is clear of debris, and the
fireplace base or floor is level.
There should be at least 50mm clearance between the top of the fascia and anything
such as a shelf, fireplace surround or mantel etc. This will allow the fascia to be lifted
off or removed during servicing. To check the shelf clearance gently place the fascia
against the surface to which it is to be fixed and measure the distance from the top of
the fascia.
If fitting the heater onto a reflective or shiny surface such as a hearth we recommend
that this surface does not extend further than 300mm from the fixing plane (wall).
Reflective or shiny surfaces that project further than 300mm may reflect an image of
the internal light source.
If fitting the heater onto a decorative hearth surface such as marble or tile it is
advisable to protect the hearth surface. Do not drag the heater as the surface finish
may be damaged.
Page 8
©
Baxi Heating U.K. Limited 2009.
INSTALLER GUIDE